PCD DIAMOND TOOLING
Polycrystalline Diamond (PCD) is one of the hardest materials known, it’s wear resistance allows tools to cut significantly longer than carbide.
Exceptionally long production runs between servicing, overall costs are reduced through extended tool life.
Heavy duty plunge tip, optimum cutting geometry and PCD tip design ensures more efficient machining.
PCD 1/2" Ø x 25mm Length of cut x 1/2" Shank x 82mm overall length
PCD (Diamond) 2 Flute with plunge facility, gives a smooth line free finish..
Suitable for profiling, rebating, grooving and apertures.
Produces accurate width slots.
Choose any 3 to get 10% off
£141.12
PCD 12mm Ø up/down x 25mm Length of cut x 12mm Shank x 70mm overall length
PCD (Diamond) up /down shear action produces a superior finish on both top and bottom faces.
Suitable for machining MDF, MFC, Laminated / veneered boards, plywood, hard & soft timber.
Heavy duty Tungsten plunge tip & optimum cutting geometries, ensures more efficient machining.
Choose any 3 products from the "MIX_3" range to get 10% off
£92.40
PCD 1/2" Ø up/down x 25mm Length of cut x 1/2" Shank x 70mm overall length
PCD (Diamond) up /down shear action produces a superior finish on both top and bottom faces.
Suitable for machining MDF, MFC, Laminated / veneered boards, plywood, hard & soft timber.
Heavy duty Tungsten plunge tip & optimum cutting geometries, ensures more efficient machining.
Choose any 3 products from the "MIX_3" range to get 10% off
£76.59
PCD 16mm Ø up/down x 35mm Length of cut x 16mm Shank x 95mm overall length
PCD (Diamond) up /down shear action produces a superior finish on both top and bottom faces.
Suitable for machining MDF, MFC, Laminated / veneered boards, plywood, hard & soft timber.
Heavy duty Tungsten plunge tip & optimum cutting geometries, ensures more efficient machining.
Choose any 3 products from the "MIX_3" range to get 10% off
£125.99
PCD 16mm Ø 4 Wing x 25mm Length of cut x 20mm Shank x 85mm overall length
PCD (Diamond) 4 Wing Hi-Performance produces a superior finish on both top and bottom faces.
Powerful, heavy-duty, hard wearing, long life, superb component finish with higher feed rates.
Suitable for machining MDF, MFC, Laminated / veneered boards, plywood, hard & soft timber.
Choose any 3 products from the "MIX_3" range to get 10% off
£189.00
1/2" PCD - straight flute PCD, for Gemstone Worktops.
Dimensions 1/2" (12.7mm) diameter x 40mm Length of Cut x 85mm Overall Length x 1/2"(12.7mm) Shank
£149.00
Bearing guided Diamond (PCD) R3mm round over x 12.7mm bottom bearing x 1/2" Shank
Specially designed tools for Gemstone© material .
£166.50
Bearing guided Diamond (PCD) Trimmer x 15mm Length of cut x 12.7mm bottom bearing x 1/2" Shank
Specially designed tools for Gemstone© material .
£105.45
Diamond (PCD) 20mm diameter Bullnose x 6mm Length of cut x 1/2" Shank, Sink drainer groover.
Specially designed tools for Gemstone© material .
£184.50
PCD 20mm Ø 4 Flute Turbo x 51mm Length of cut x 20mm Shank x 120mm overall length
PCD (Diamond) 4 Flute Turbo produces a superior finish on both top and bottom faces.
For High Speed machining, especially good for composite door blanks..
Ideal for sizing, profiling, window cassette & letter box apertures.
Suitable for machining MDF, MFC, Laminated / veneered boards, plywood, hard & soft timber.
Choose any 3 products from the "MIX_3" range to get 10% off
£298.00
PCD 1/2" Ø 3 Flute Turbo x 25mm Length of cut x 1/2" Shank x 76mm overall length
PCD (Diamond) 3 Flute Turbo produces a superior finish on both top and bottom faces (helps prevent edge chipping).
Powerful, heavy-duty, hard wearing, long life, superb component finish, for high speed machining in large volume production environments.
Suitable for machining MDF, MFC, Laminated / veneered boards, plywood, hard & soft timber.
Diamond (PCD) plunge tip, heavy duty tool body with optimum cutting geometies, designed for maximum tool life.
Choose any 3 products from the "MIX_3" range to get 10% off
£213.80
PCD 12mm Ø 3 Flute Turbo x 25mm Length of cut x 12mm Shank x 69mm overall length
PCD (Diamond) 3 Flute Turbo produces a superior finish on both top and bottom faces (helps prevent edge chipping).
Powerful, heavy-duty, hard wearing, long life, superb component finish, for high speed machining in large volume production environments.
Suitable for machining MDF, MFC, Laminated / veneered boards, plywood, hard & soft timber.
Diamond (PCD) plunge tip, heavy duty tool body with optimum cutting geometies, designed for maximum tool life.
Choose any 3 products from the "MIX_3" range to get 10% off
£213.80